Amaircare Website - Filter Changes

Filter Change Instructions

Wednesday, 14-May-2008 01:12:23 EDT

Amaircare Roomaid Filter Change Instructions

Please read and follow the directions below to replace any filter(s) on your Roomaid Air Filtration Device.

To view an animation of a complete filter change including the new heavy duty V.O.C. Canister, select video size.
Windows Media Player is required to view the Animation files.

Play Low-Res Animation (320 x 240 - 1MB)
Play Hi-Res Animation (640 x 480 - 2.75MB)


Prefilter Replacement 1. Turn the unit off and unplug it. 2. Remove the used prefilter and carefully discard it in a plastic bag. 3. Line up the seam in the prefilter with the receptacle at the back of the unit. Pull the new prefilter over the unit so it snugly covers the screen. 4. Plug the unit in and turn it on.

	V.O.C. Filter Replacement 1. Turn the unit off and unplug it. 2. Turn the unit up-side down. With one hand holding the HEPA cartridge, pull the motor/fan housing off. 3. Remove the used V.O.C. filter and carefully discard it in a plastic bag. 4. Roll the new V.O.C. filter into a cylinder smaller than the size of the opening in the HEPA cartridge. Insert the V.O.C. filter all the way into the well and spread it open against the HEPA filter. 5. Sit the motor/fan housing right side up and seat the gasket in the groove. 6. Place the HEPA cartridge on the motor/fan housing and align the plugs in the cartridge with the holes in the housing. Once the holes are aligned press firmly on the top of the cartridge to secure it to the housing. 7. Plug the unit in and turn it on.

HEPA Cartridge Replacement 1. Turn the unit off and unplug it. 2. Turn the unit upside down. With one hand holding the HEPA cartridge, pull the motor/fan housing away. Discard the cartridge in a plastic bag. 3. Sit the motor/fan housing right side up and seat the gasket in the groove. 4. Place the HEPA cartridge on the motor/fan housing and align the plugs in the cartridge with the holes in the housing. Once the holes are aligned press firmly on the top of the cartridge to secure it to the housing. 6. Plug the unit in and turn it on.

Back

"Cleaning the Air You Breathe!"